LINEVO Foshan Plant · 15,000+ m² · 50+ Patents · Since 2013
Jelly Packing MachineLINEVO Gel, Stick & Cup Lab
FAMILY: T03MODEL: LV-500SY / LV-700SY / LV-980SYFORMAT: MULTI-LANE 4-SIDE-SEAL GEL & PASTE SACHETS (5–100 ML)MANUFACTURER: LINEVO (FOSHAN)

LINEVO LV-500SY / 700SY / 980SY Multi-Lane 4-Side-Seal Viscous Gel & Paste Sachet Machine

LINEVO's flagship 2-to-16 lane four-side-seal viscous liquid and paste sachet series (LV-500SY, LV-700SY, and LV-980SY across 500, 700, and 980 mm max web widths)—dosing 5–100 ml (extensible up to 500 ml) of thick fruit gels, herbal pastes, enzyme jellies, and sauces at 20–40 cuts/min using anti-drip rotary-valve piston pumps.

01 // APPLICATION FIT SCREENING

What It Is Built For vs. When to Choose Another Configuration

USE IT FOR

Target Products & Production Duty

  • High-volume gel, paste, and wellness producers packing 5–100 ml (extensible to 500 ml) portions into 50–125 mm wide × 45–160 mm long 4-side-seal sachets across 2 to 16 lanes.
  • Thick syrups, herbal pastes, enzyme drinks, fruit-gel purees, and condiments needing rotary-valve anti-drip piston pumps.
  • Plants scaling predictably from 2–4 lanes (LV-500SY) to 3–10 lanes (LV-700SY) or 4–16 lanes (LV-980SY) on one standardized PLC + HMI platform.
CHOOSE ANOTHER LINEVO MACHINE IF

Better-Matched Sibling Configurations

02 // TECHNICAL PARAMETERS & OPERATING CONDITIONS

Specification Table (Metric & Imperial)

ParameterMetric SpecificationImperial EquivalentOperating Condition & Verification Note
ModelsLV-500SY / LV-700SY / LV-980SY—Three frame widths in LINEVO's T03 4-side-seal liquid/paste sachet series.
Lanes2–4 / 3–10 / 4–16 lanes—Listed for LV-500SY / LV-700SY / LV-980SY respectively; lane count is selected per project.
Filling Range5 – 100 (extensible up to 500) ml0.17 – 3.38 (up to 16.9) fl ozDose for your product is set and checked in the sample trial.
Bag Width50 – 125 mm1.97 – 4.92 inSame range for all three models; confirm forming tooling in quotation.
Bag Length45 – 160 mm1.77 – 6.30 inSame range for all three models; confirm forming and cutting configuration in quotation.
Maximum Film WidthMax. 500 / 700 / 980 mm19.69 / 27.56 / 38.58 inListed for LV-500SY / LV-700SY / LV-980SY respectively.
Packing Speed20–40 cuts/min—Machine cycles per minute; each cycle cuts one pack in every lane (apply 0.70–0.85 shift OEE).
Sealing Type & Control4-Sided Seal · PLC Control + Touch Screen HMI—Each pack style needs its own tooling; options listed in quotation.
Voltage & Power220V, 50/60Hz · 4 / 5.5 / 7 kW—Power listed for LV-500SY / LV-700SY / LV-980SY respectively; confirm site utilities.
Air Consumption0.6–0.8 MPa · 0.35 m³/min—Compressed air at the machine.
Machine Weight650 / 850 / 1000 kg1,433 / 1,874 / 2,205 lbListed for LV-500SY / LV-700SY / LV-980SY respectively.
Machine Dimensions & Material1540×1375×2270 / 1790×1445×2340 / 1940×1600×2650 mm · SUS30460.6×54.1×89.4 / 70.5×56.9×92.1 / 76.4×63.0×104.3 inFood-grade SUS304 frame and product-contact parts; confirm dimensions in quotation.

Shift Production Reality Note: Listed cycle speeds depend on container or bag volume, target fill weight, and material flow characteristics. For multi-shift plant planning, multiply nominal run rate by a 0.70–0.85 shift OEE factor (accounting for film/label splices, hopper refills, and routine cleaning) and confirm exact speed with your samples during Foshan FAT.

03 // MECHANICAL & CONTROLS BOUNDARY

What Is Included vs. What We Review With You

BASE MACHINE ARCHITECTURE

Core Station Scope

  • Food-grade SUS304 stainless steel frame, product-contact parts, and dual-layer 4-side sachet forming assembly
  • Rotary-valve anti-drip piston dosing system, photoelectric eye-mark tracing sensor, and PLC + touchscreen HMI
ENGINEERED PER PROJECT

Reviewed Against Your Samples & Plant

  • Model tier (LV-500SY vs. LV-700SY vs. LV-980SY) and exact lane count (2 to 16 lanes)
  • High-Precision Piston Dosing Pump cylinder sizing (5–100 ml standard vs. up to 500 ml extended) plus optional hopper heating/mixing
  • 4-side roller embossing pattern, batch/expiry date-coding printer, and site electrical/air utilities
SUB-ASSEMBLY HARDWARE SPECIFICATION

Verified Electrical, Sensing & Pneumatic BOM

CONTROL CABINET // 01Siemens

PLC Motion & Sequence Controller

Main programmable logic controller coordinating multi-lane rotary piston dosing, film/cup indexing, jacket heating, and sealing interlocks.

TIMING & DC BUS // 02OMRON

Rotary Encoder, Control Relays & 24V Switching Power Supply

Phase-angle timing feedback, cabinet switching relays, and regulated 24V DC power supply across multi-lane stick, sachet, and cup stations.

OPERATOR & DRIVE // 03Delta Electronics

HMI Color Touchscreen & Variable Frequency Drive (VFD)

Multi-recipe touchscreen terminal storing lane dose/temperature profiles and inverter motor speed control for main drives and conveyors.

ANTI-DRIP PNEUMATICS // 04AirTAC

Pneumatic Cylinders, Solenoid Valves, Vacuum Gauge & FRL Unit

Suck-back anti-drip nozzle actuators, cross-sealing cylinders, manifold valves, pouch-opening vacuum gauge, and air preparation unit.

Representative electrical, sensing, and pneumatic hardware fitted on LINEVO packaging configurations; exact part series or project-specified alternatives are itemized in your written quotation BOM.

04 // OPERATING SEQUENCE & FLOOR RELIABILITY

How It Works & Mechanical Countermeasures to Common Line Failures

  1. 01
    Volumetric Piston Metering

    Rotary-valve anti-drip piston pumps draw and meter the configured 5–100 ml gel, syrup, or paste dose per lane.

  2. 02
    Continuous Web Pulling & Dual-Layer Forming

    Parent film (up to 500 / 700 / 980 mm) pulls downward and shapes into aligned front/back 4-side strips guided by photoelectric eye-mark tracing.

  3. 03
    Vertical & Bottom Sealing + Inline Date Coding

    Heated rollers seal side and bottom borders while inline date coders stamp batch and expiry details.

  4. 04
    Nozzle Injection & Top Cross-Cut

    Dosing nozzles inject metered gel cleanly into each pocket before horizontal sealing rollers close and cut finished sachets.

Production Floor Failure Modes & LINEVO Countermeasures

Ordering Parent Film Wider Than the Machine Unwind Frame

Floor Risk: An 8-lane × 60 mm 4-side sachet requires 8 × 120 = 960 mm of parent web—impossible to mount on a 500 mm or 700 mm machine.

Mechanical Countermeasure: Three graduated frame widths (500 / 700 / 980 mm) let you size exact lane count × `2 × Sachet Width` upfront using our Film Width Chart.

Thick Herbal Pastes & Fruit Gels Stringing Across Bottom/Top Seams

Floor Risk: Gravity-fed valves dribble viscous paste onto hot 4-side rollers, causing blackened weak seals.

Mechanical Countermeasure: Positive rotary-valve anti-drip piston pumps cut flow sharply at the end of every stroke.

Printed Sachet Graphics Creeping Into Top Cut Blades Over Long Reels

Floor Risk: Film stretch on foil/PET laminates shifts cut lines through brand logos.

Mechanical Countermeasure: High-sensitivity photoelectric eye tracing automatically detects color registration marks to lock uniform sachet length (45–160 mm).

Under-Sizing Air & Heater Utilities When Scaling to 10–16 Lanes

Floor Risk: Wide 980 mm seal bars drop temperature if plant voltage or air pressure sags.

Mechanical Countermeasure: Published model-by-model power (4 / 5.5 / 7 kW) and compressed air (0.6–0.8 MPa, 0.35 m³/min) let plant engineers wire dedicated drops before delivery.

05 // PROCUREMENT & ACCEPTANCE PROTOCOL

Comparing Quotations? Check These 5 Things

01
Multi-Lane Cuts/Min × Shift OEE (0.70–0.85) vs. Dry Speed

Multiply cycle rate (20–40 cuts/min) by lane count and a realistic 0.70–0.85 shift OEE factor accounting for hot-fill hopper replenishment, parent reel splices, and CIP sanitation.

02
Hot-Fill Hopper Heating, Agitation & Anti-Drip Pump Scope

Verify whether double-walled jacketed heating, mixing paddles, rotary-valve piston dosing, and pneumatic suck-back shut-off nozzles are sized for your gel viscosity and particulate size.

03
Sanitary Steel Grade (SUS304 vs. SUS316L), Power & Air Split

Confirm product-contact steel grade for acidic fruit gels, electrical heater load (kW, voltage/phase), and dry compressed air consumption (0.6–0.8 MPa) on the written scope sheet.

04
Parent Film Slitting Width, Forming Tubes & Cut Tooling

Check parent rollstock maximum width (420 / 500 / 700 / 980 mm), lane pitch, tear-notch punch geometry, and cup cavity rings against approved dieline drawings before plate engraving.

05
Pre-Shipment Foshan FAT Leak & Seal-Contamination Trial

Require a filmed Foshan FAT running viscous gel or gummy samples at target fill temperature to verify zero seal-zone stringing, weight uniformity across lanes, and burst resistance.

PRE-DISPATCH PROJECT SEQUENCE

From Sample Audit to Foshan FAT & Export Commissioning

  1. 01Sample Audit

    Send physical containers, pouches, lids, film reels, or product specs to Foshan so engineers verify dimensions, flow behavior, and station geometry.

  2. 02Written Scope Freeze

    Confirm exact model/lane count, included vs. project-reviewed modules, electrical/air utilities, and format parts in the technical quotation.

  3. 03Foshan Fabrication & Wiring

    CNC machining, stainless frame assembly, PLC/HMI programming, and inline station synchronization inside LINEVO's 15,000+ m² Foshan plant.

  4. 04Foshan FAT Run Before Shipment

    Full-speed trial on sample materials verifying registration, dosing/vacuum stability, seal integrity, and fault interlocks on video or in person.

  5. 05Export Crating & Commissioning

    Fumigation-free export crating, English schematics, parameter backups, wear-part list, and remote video or scheduled on-site commissioning.

06 // MACHINE-SPECIFIC ENGINEERING ANSWERS

Frequently Asked Questions

How do I select between LV-500SY, LV-700SY, and LV-980SY?

Multiply `2 × finished sachet width (mm)` by your desired lane count: totals ≤500 mm fit LV-500SY (2–4 lanes), ≤700 mm fit LV-700SY (3–10 lanes), and ≤980 mm fit LV-980SY (4–16 lanes).

What is the realistic 8-hour shift output on an 8-lane LV-700SY or LV-980SY?

At 30 cuts/min × 8 lanes = 240 sachets/min dry speed, applying a realistic 0.78 shift OEE yields ~11,230 sachets/hr or ~89,850 sachets per 8-hour shift. Model your exact lanes in /tools/jelly-line-output-calculator/.

Can we add a heated agitated hopper for hot-fill konjac or carrageenan gel on LV-500SY / 700SY / 980SY?

Yes—material feeding, jacketed thermal heating, and paddle mixing are evaluated per project around your gel's setting temperature and viscosity.

DIRECT FOSHAN FACTORY ENGINEERING

Request Layout Drawing & Sample Trial for LV-500SY / LV-700SY / LV-980SY

Share your pack dimensions, target fill volume/weight, gel dosing temperature, shift output, and local electrical grid (voltage/Hz). LINEVO engineers confirm exact lane/cavity tooling and Foshan FAT schedule without obligation.