LINEVO Foshan Plant · 15,000+ m² · 50+ Patents · Since 2013
Jelly Packing MachineLINEVO Gel, Stick & Cup Lab
FAMILY: T04MODEL: LV-210FORMAT: RESEALABLE STAND-UP ZIPPER POUCHES (LV-210)MANUFACTURER: LINEVO (FOSHAN)

LINEVO LV-210 Premade Zipper & Stand-Up Pouch Machine for Gummies & Jelly Multipacks

LINEVO model LV-210 automatic premade pouch packaging machine—retrieving, opening (including resealable press-to-close zippers), filling, and sealing stand-up doypacks across 90–210 mm widths and 110–330 mm lengths at a listed 20–70 bags/min for gummy candies, fruit chews, and secondary multipacks of mini jelly cups or sticks.

01 // APPLICATION FIT SCREENING

What It Is Built For vs. When to Choose Another Configuration

USE IT FOR

Target Products & Production Duty

  • Confectionery and functional gummy brands packing pectin/gelatin gummies, vitamin chews, and sour jellies into retail resealable stand-up zipper pouches (90–210 × 110–330 mm).
  • Secondary multipack lines collating 10–40 sealed konjac sticks or mini jelly cups into family-size stand-up doypacks at 20–70 bags/min.
  • Brands needing crisp shelf-standing gussets and press-to-close zippers without vertical forming-collar creases.
CHOOSE ANOTHER LINEVO MACHINE IF

Better-Matched Sibling Configurations

02 // TECHNICAL PARAMETERS & OPERATING CONDITIONS

Specification Table (Metric & Imperial)

ParameterMetric SpecificationImperial EquivalentOperating Condition & Verification Note
ModelLV-210—LINEVO T04 premade pouch packaging series.
Bag Width90–210 mm3.54–8.27 inThe forming set or change parts are made for each pack size you run.
Bag Length110–330 mm4.33–12.99 inThe forming set or change parts are made for each pack size you run.
Packing Speed20–70 bags/min—Depends on the product, fill weight, and pack size (apply 0.70–0.85 shift OEE).
Power & Voltage3.5 kW · 220V, 50/60Hz—Give voltage, phase, and frequency at your site; quotation states electrical configuration.
Machine Weight900 kg1,984 lbNet machine weight; shipping weight and crate size are stated with the order.
Machine Size2150 × 1350 × 1300 mm84.6 × 53.1 × 51.2 inLength × width × height; layout drawing in quotation shows complete floor space with weigher.

Shift Production Reality Note: Listed cycle speeds depend on container or bag volume, target fill weight, and material flow characteristics. For multi-shift plant planning, multiply nominal run rate by a 0.70–0.85 shift OEE factor (accounting for film/label splices, hopper refills, and routine cleaning) and confirm exact speed with your samples during Foshan FAT.

03 // MECHANICAL & CONTROLS BOUNDARY

What Is Included vs. What We Review With You

BASE MACHINE ARCHITECTURE

Core Station Scope

  • Automatic premade pouch magazine retrieval, vacuum suction + zipper opening station, and heat-sealing/cooling bars
  • Finished pouch discharge chute within 2150 × 1350 × 1300 mm base machine frame
ENGINEERED PER PROJECT

Reviewed Against Your Samples & Plant

  • Application, format gripper/opener tooling, and upstream multihead weigher (anti-sticking dimpled buckets for oiled/sugar-sanded gummies) or liquid filler
  • Ribbon/TIJ date-coding station, no-open/no-fill sensor interlocks, and Z-bucket elevator platform
SUB-ASSEMBLY HARDWARE SPECIFICATION

Verified Electrical, Sensing & Pneumatic BOM

CONTROL CABINET // 01Siemens

PLC Motion & Sequence Controller

Main programmable logic controller coordinating multi-lane rotary piston dosing, film/cup indexing, jacket heating, and sealing interlocks.

TIMING & DC BUS // 02OMRON

Rotary Encoder, Control Relays & 24V Switching Power Supply

Phase-angle timing feedback, cabinet switching relays, and regulated 24V DC power supply across multi-lane stick, sachet, and cup stations.

OPERATOR & DRIVE // 03Delta Electronics

HMI Color Touchscreen & Variable Frequency Drive (VFD)

Multi-recipe touchscreen terminal storing lane dose/temperature profiles and inverter motor speed control for main drives and conveyors.

ANTI-DRIP PNEUMATICS // 04AirTAC

Pneumatic Cylinders, Solenoid Valves, Vacuum Gauge & FRL Unit

Suck-back anti-drip nozzle actuators, cross-sealing cylinders, manifold valves, pouch-opening vacuum gauge, and air preparation unit.

Representative electrical, sensing, and pneumatic hardware fitted on LINEVO packaging configurations; exact part series or project-specified alternatives are itemized in your written quotation BOM.

04 // OPERATING SEQUENCE & FLOOR RELIABILITY

How It Works & Mechanical Countermeasures to Common Line Failures

  1. 01
    Automatic Bag Retrieval

    Vacuum suction arms pick flat premade stand-up or zipper pouches cleanly from the horizontal magazine.

  2. 02
    Top & Zipper Track Opening

    Dual vacuum pads and mechanical zipper-opening jaws separate both the pouch mouth and press-to-close zipper track.

  3. 03
    Synchronized Product Fill

    Gummies, jelly beans, or sealed mini jelly cups/sticks drop cleanly through a funnel that shields the zipper track from sugar dust.

  4. 04
    Heat Sealing, Cooling & Output

    Heat bars fuse the top seal above the tear notch, cooling bars flatten the seam, and finished stand-up pouches discharge.

Production Floor Failure Modes & LINEVO Countermeasures

Unopened Zipper Pouches Dumping Gummies Onto the Shop Floor

Floor Risk: Static cling or stiff matte-varnish doypacks occasionally resist suction cups, causing blind fillers to dump expensive vitamin gummies onto machinery.

Mechanical Countermeasure: Dedicated mechanical zipper-opening jaws separate the zipper track positively before triggering upstream weigher discharge.

Citric Sour Sugar Sand Fouling Press-to-Close Zipper Tracks

Floor Risk: Loose sour sugar crystals lodging inside zipper grooves prevent consumers from resealing bags and contaminate top heat seals.

Mechanical Countermeasure: Diving fill funnels extend past the zipper track during gummy discharge so top seal margins stay clean.

Wrinkled Top Seams on Wide 180–210 mm Heavy Multipack Doypacks

Floor Risk: Heavy 500 g–1 kg jelly-cup multipacks sag in weak grippers, buckling the top header before heat sealing.

Mechanical Countermeasure: Rigid pouch grippers and two-stage heat + cooling bar consolidation iron flat, retail-grade header seams.

Oiled or Pectin Gummies Bridging in Upstream Scales

Floor Risk: Sticky confectionery slows net LV-210 speed well below dry mechanical capability.

Mechanical Countermeasure: LINEVO pairs LV-210 with embossed anti-sticking multihead weighers verified on your gummy samples in Foshan.

05 // PROCUREMENT & ACCEPTANCE PROTOCOL

Comparing Quotations? Check These 5 Things

01
Multi-Lane Cuts/Min × Shift OEE (0.70–0.85) vs. Dry Speed

Multiply cycle rate (20–40 cuts/min) by lane count and a realistic 0.70–0.85 shift OEE factor accounting for hot-fill hopper replenishment, parent reel splices, and CIP sanitation.

02
Hot-Fill Hopper Heating, Agitation & Anti-Drip Pump Scope

Verify whether double-walled jacketed heating, mixing paddles, rotary-valve piston dosing, and pneumatic suck-back shut-off nozzles are sized for your gel viscosity and particulate size.

03
Sanitary Steel Grade (SUS304 vs. SUS316L), Power & Air Split

Confirm product-contact steel grade for acidic fruit gels, electrical heater load (kW, voltage/phase), and dry compressed air consumption (0.6–0.8 MPa) on the written scope sheet.

04
Parent Film Slitting Width, Forming Tubes & Cut Tooling

Check parent rollstock maximum width (420 / 500 / 700 / 980 mm), lane pitch, tear-notch punch geometry, and cup cavity rings against approved dieline drawings before plate engraving.

05
Pre-Shipment Foshan FAT Leak & Seal-Contamination Trial

Require a filmed Foshan FAT running viscous gel or gummy samples at target fill temperature to verify zero seal-zone stringing, weight uniformity across lanes, and burst resistance.

PRE-DISPATCH PROJECT SEQUENCE

From Sample Audit to Foshan FAT & Export Commissioning

  1. 01Sample Audit

    Send physical containers, pouches, lids, film reels, or product specs to Foshan so engineers verify dimensions, flow behavior, and station geometry.

  2. 02Written Scope Freeze

    Confirm exact model/lane count, included vs. project-reviewed modules, electrical/air utilities, and format parts in the technical quotation.

  3. 03Foshan Fabrication & Wiring

    CNC machining, stainless frame assembly, PLC/HMI programming, and inline station synchronization inside LINEVO's 15,000+ m² Foshan plant.

  4. 04Foshan FAT Run Before Shipment

    Full-speed trial on sample materials verifying registration, dosing/vacuum stability, seal integrity, and fault interlocks on video or in person.

  5. 05Export Crating & Commissioning

    Fumigation-free export crating, English schematics, parameter backups, wear-part list, and remote video or scheduled on-site commissioning.

06 // MACHINE-SPECIFIC ENGINEERING ANSWERS

Frequently Asked Questions

Can the LV-210 also fill liquid drinking-jelly into premade stand-up pouches?

Yes—within the LV-210 platform family (which also includes premade juice and milk/beverage configurations), pairing piston liquid nozzles instead of a gummy weigher fills liquid stand-up pouches across 90–210 × 110–330 mm.

How fast does LV-210 run on resealable zipper gummy bags in real shifts?

Published range is 20–70 bags/min depending on pouch dimensions, zipper opening dwell, and gummy dump settle time; plan 0.70–0.85 shift OEE in our Jelly Output Calculator (/tools/jelly-line-output-calculator/).

What pouch features work on LV-210?

Stand-up bottom-gusset doypacks, flat 3-side-seal bags, press-to-close zippers, euro-slot hang holes, and tear notches within 90–210 mm width and 110–330 mm length.

DIRECT FOSHAN FACTORY ENGINEERING

Request Layout Drawing & Sample Trial for LV-210

Share your pack dimensions, target fill volume/weight, gel dosing temperature, shift output, and local electrical grid (voltage/Hz). LINEVO engineers confirm exact lane/cavity tooling and Foshan FAT schedule without obligation.