LINEVO Foshan Plant · 15,000+ m² · 50+ Patents · Since 2013
Jelly Packing MachineLINEVO Gel, Stick & Cup Lab
FAMILY: T04FORMAT: ROLL-FILM SEALED JELLY & PUDDING CUPSMANUFACTURER: LINEVO (FOSHAN)

Automatic SUS304/316L CIP Jelly, Pudding & Viscous Cup Filling-Sealing Machine

A heavy-duty SUS304/316L automatic cup filling and roll-film lidding machine featuring an integrated Clean-in-Place (CIP) sanitation protocol, servo-driven volumetric piston dosing, and a Siemens PLC + touchscreen HMI—engineered for fruit jelly cups, pudding, konjac cups, and viscous dips.

01 // APPLICATION FIT SCREENING

What It Is Built For vs. When to Choose Another Configuration

USE IT FOR

Target Products & Production Duty

  • Confectionery, dessert, and food manufacturers filling and roll-film sealing preformed PP/PET cups of fruit jelly, pudding, custard, yogurt gel, or viscous dips.
  • Dairy and hot-fill jelly plants requiring heavy-duty SUS304/316L stainless steel with integrated Clean-in-Place (CIP) sanitation without manual pump disassembly.
  • Lines needing Siemens PLC real-time throughput monitoring and servo-driven piston dosing accuracy.
CHOOSE ANOTHER LINEVO MACHINE IF

Better-Matched Sibling Configurations

02 // TECHNICAL PARAMETERS & OPERATING CONDITIONS

Specification Table (Metric & Imperial)

ParameterMetric SpecificationImperial EquivalentOperating Condition & Verification Note
Equipment FamilyLINEVO T04 Automatic Cup Filling & Sealing Series—Rotary or multi-cavity indexing pocket plate machined around your exact cup rim diameter.
Sanitary Construction & CleaningHeavy-duty SUS304/316L stainless steel + integrated CIP protocol—Enables fast internal pipeline/piston sanitation without manual disassembly.
Filling MechanismServo-driven volumetric piston pump dosing—Product trials establish fill settings and assess cup, lid material, and seal conditions.
Control & DiagnosticsSiemens PLC + Touchscreen HMI—Integrated Industrial PLC & Smart Diagnostic Suite with real-time throughput monitoring.
Cup Size, Cavity Count & UtilitiesConfigured per physical cup & lid film sample—Cups/hr, heater load, air consumption, and site voltage stated in the quotation.

Shift Production Reality Note: Listed cycle speeds depend on container or bag volume, target fill weight, and material flow characteristics. For multi-shift plant planning, multiply nominal run rate by a 0.70–0.85 shift OEE factor (accounting for film/label splices, hopper refills, and routine cleaning) and confirm exact speed with your samples during Foshan FAT.

03 // MECHANICAL & CONTROLS BOUNDARY

What Is Included vs. What We Review With You

BASE MACHINE ARCHITECTURE

Core Station Scope

  • SUS304/316L stainless steel frame, cup denester, indexing table, heat-ring lidding station, and discharge conveyor
  • Integrated Clean-in-Place (CIP) sanitation manifold
ENGINEERED PER PROJECT

Reviewed Against Your Samples & Plant

  • Precision High-Speed Volumetric Filling & servo-driven piston pump dosing sized to cup ml
  • Industrial PLC & Smart Diagnostic Suite (Siemens PLC + HMI) plus optional pre-fill fruit-cube depositor or UV sterilization
  • Custom aluminum/stainless pocket rings matched to cup rim drawing, eye-mark roll-film cutter, and batch coder
SUB-ASSEMBLY HARDWARE SPECIFICATION

Verified Electrical, Sensing & Pneumatic BOM

CONTROL CABINET // 01Siemens

PLC Motion & Sequence Controller

Main programmable logic controller coordinating multi-lane rotary piston dosing, film/cup indexing, jacket heating, and sealing interlocks.

TIMING & DC BUS // 02OMRON

Rotary Encoder, Control Relays & 24V Switching Power Supply

Phase-angle timing feedback, cabinet switching relays, and regulated 24V DC power supply across multi-lane stick, sachet, and cup stations.

OPERATOR & DRIVE // 03Delta Electronics

HMI Color Touchscreen & Variable Frequency Drive (VFD)

Multi-recipe touchscreen terminal storing lane dose/temperature profiles and inverter motor speed control for main drives and conveyors.

ANTI-DRIP PNEUMATICS // 04AirTAC

Pneumatic Cylinders, Solenoid Valves, Vacuum Gauge & FRL Unit

Suck-back anti-drip nozzle actuators, cross-sealing cylinders, manifold valves, pouch-opening vacuum gauge, and air preparation unit.

Representative electrical, sensing, and pneumatic hardware fitted on LINEVO packaging configurations; exact part series or project-specified alternatives are itemized in your written quotation BOM.

04 // OPERATING SEQUENCE & FLOOR RELIABILITY

How It Works & Mechanical Countermeasures to Common Line Failures

  1. 01
    Automatic Cup Denesting

    Preformed PP or PET jelly cups drop singly from stack magazines into machined indexing pockets.

  2. 02
    Servo Volumetric Piston Filling

    Servo-driven piston pumps dispense metered hot or ambient jelly cleanly below the cup rim.

  3. 03
    Registered Roll-Film Lidding & Heat Sealing

    Photoelectric eye-mark tracking centers printed lid artwork over each cavity before heated rings fuse an easy-peel hermetic seal and rewind waste trim.

  4. 04
    Discharge & Date Coding

    Sealed cups eject onto the outfeed belt past an inline lot/expiry coding station.

Production Floor Failure Modes & LINEVO Countermeasures

Jelly Splash on Cup Flanges Causing Channel Leaks During Retort or Transit

Floor Risk: Abrupt pneumatic piston stops splash hot syrup onto the 3 mm cup rim, preventing roll-film sealant adhesion.

Mechanical Countermeasure: Servo-driven piston pump dosing decelerates smooth velocity profiles at stroke end to keep sealing rims dry.

Lids Either Impossible for Kids to Peel or Popping Open in Air-Freight

Floor Risk: Unmatched PP cup resin and lid sealant temperatures yield erratic peel force.

Mechanical Countermeasure: Foshan product trials validate exact heat-ring temperature, dwell pressure, and easy-peel lid laminate pairing on your cups.

Long Shift Changeover Washing Sticky Pectin/Dairy Pipelines

Floor Risk: Manual piston wrench teardown between fruit flavors eats 90 minutes of shift time.

Mechanical Countermeasure: SUS304/316L construction with integrated Clean-in-Place (CIP) flushes hopper and piston channels in place.

Roll-Film Waste Matrix Snapping Mid-Run

Floor Risk: Too-narrow skeleton borders tear on rewind spindles, halting cup indexing.

Mechanical Countermeasure: LINEVO signs off your lidding film dieline (6–8 mm inter-cavity web + 10–12 mm outer border) before cylinder engraving.

05 // PROCUREMENT & ACCEPTANCE PROTOCOL

Comparing Quotations? Check These 5 Things

01
Multi-Lane Cuts/Min × Shift OEE (0.70–0.85) vs. Dry Speed

Multiply cycle rate (20–40 cuts/min) by lane count and a realistic 0.70–0.85 shift OEE factor accounting for hot-fill hopper replenishment, parent reel splices, and CIP sanitation.

02
Hot-Fill Hopper Heating, Agitation & Anti-Drip Pump Scope

Verify whether double-walled jacketed heating, mixing paddles, rotary-valve piston dosing, and pneumatic suck-back shut-off nozzles are sized for your gel viscosity and particulate size.

03
Sanitary Steel Grade (SUS304 vs. SUS316L), Power & Air Split

Confirm product-contact steel grade for acidic fruit gels, electrical heater load (kW, voltage/phase), and dry compressed air consumption (0.6–0.8 MPa) on the written scope sheet.

04
Parent Film Slitting Width, Forming Tubes & Cut Tooling

Check parent rollstock maximum width (420 / 500 / 700 / 980 mm), lane pitch, tear-notch punch geometry, and cup cavity rings against approved dieline drawings before plate engraving.

05
Pre-Shipment Foshan FAT Leak & Seal-Contamination Trial

Require a filmed Foshan FAT running viscous gel or gummy samples at target fill temperature to verify zero seal-zone stringing, weight uniformity across lanes, and burst resistance.

PRE-DISPATCH PROJECT SEQUENCE

From Sample Audit to Foshan FAT & Export Commissioning

  1. 01Sample Audit

    Send physical containers, pouches, lids, film reels, or product specs to Foshan so engineers verify dimensions, flow behavior, and station geometry.

  2. 02Written Scope Freeze

    Confirm exact model/lane count, included vs. project-reviewed modules, electrical/air utilities, and format parts in the technical quotation.

  3. 03Foshan Fabrication & Wiring

    CNC machining, stainless frame assembly, PLC/HMI programming, and inline station synchronization inside LINEVO's 15,000+ m² Foshan plant.

  4. 04Foshan FAT Run Before Shipment

    Full-speed trial on sample materials verifying registration, dosing/vacuum stability, seal integrity, and fault interlocks on video or in person.

  5. 05Export Crating & Commissioning

    Fumigation-free export crating, English schematics, parameter backups, wear-part list, and remote video or scheduled on-site commissioning.

06 // MACHINE-SPECIFIC ENGINEERING ANSWERS

Frequently Asked Questions

Can one cup machine run both 35 g mini konjac cups and 120 g pudding cups?

Different cup rim diameters require dedicated pocket plates, denester fingers, and heat-sealing rings, whereas cups sharing the exact same top rim diameter but different depths can often run on the same pocket ring with piston stroke adjustment.

Does this machine use pre-cut foil lids or printed rollstock lidding film?

Rollstock lidding film with photoelectric eye-mark registration + waste matrix rewind is standard for smooth plastic/laminate jelly cup lids; pre-cut foil lid placement can also be evaluated around your cup samples.

Can we pack sealed mini jelly cups into stand-up retail zipper bags automatically?

Yes—pair this cup sealer upstream of a multihead counter/weigher feeding our Model LV-210 Premade Zipper Pouch Machine (/machines/lv-210-premade-zipper-gummy-jelly-pouch-machine/).

DIRECT FOSHAN FACTORY ENGINEERING

Request Layout Drawing & Sample Trial for Automatic Sauce Cup Filling and Sealing Machine

Share your pack dimensions, target fill volume/weight, gel dosing temperature, shift output, and local electrical grid (voltage/Hz). LINEVO engineers confirm exact lane/cavity tooling and Foshan FAT schedule without obligation.